• Mod: 132 decibel replacements for stock horns

• Time required: 15 min (not including removing the front bumper cover)

• Cost: $50 CAD for Freeway Blasters (high and low note)

• Supplier: Canadian Tire

Since I had removed the front bumper cover already to install the Dixie Air Horns, I decided to upgrade the factory horns at the same time. I don't know how loud the stock horns are supposed to be but I bought these "Freeway Blasters" that are supposed to be 132 decibels.

Procedure: The factory horns are Klaxxon and Made in France. The new ones are FIAMM and made in the USA. They are shaped identically and fit in exactly the same spot.
This picture shows the stock horns with the ground wire from the air compressor attached.
Because the factory plug is narrower than the connectors on the new horns, I had to cut the plug off and attach new connectors.
Results I was a bit disappointed at first because the new horns didn't really sound that much different than the old ones. Or at least I couldn't really tell the difference (maybe I've been to too many dances and loud concerts ).  Anyway, I pointed the horns out a bit hoping to accentuate the sound. Now after using it on the road, I definitely can tell that the tone is different and it's louder than the old horn. How much I can't say, but it's definitely louder.